期刊名称：Journal of Software Engineering and Applications
印刷版ISSN：1945-3116
电子版ISSN：1945-3124
出版年度：2013
卷号：06
期号：07
页码：49-55
DOI：10.4236/jsea.2013.67B009
语种：English
出版社：Scientific Research Publishing
摘要：The results of kinematic motion analysis were used for the structural analysis based on data that the load applied to each part. The problem of the fatigue strength estimation of materials or components containing natural defects, inclusions or in homogeneities is of great importance for both a scientifically or industrial point of view. Fatigue behavior in components is often affected by the presence of residual stresses introduced by processes such as actuator system. Analysis can provide the estimation of the crack growth curves with sufficient accuracy, even in case of complicated bell crank structures which are crucial for preserving aileron integrity and which participate in transfer of load. Probability of crack detection or any other damage detection is a result of many factors. An endurance life prediction of bell crank is used finite element analyses. Endurance test data for slim test specimens were compared with the predicted fatigue life for verification.
关键词：Kinematic Motion Analysis; Fatigue Life Analysis; FEM; Bell Crank System; Structural Analysis
