期刊名称：ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
印刷版ISSN：2194-9042
电子版ISSN：2194-9050
出版年度：2009
卷号：XXXVIII-3/W8
页码：224-229
出版社：Copernicus Publications
摘要：Terrain classification of current discrete airborne laser scanning data requires filtering algorithms based on the spatial relationship between neighbouring three-dimensional points. However, difficulties commonly occur with low vegetation on steep slopes and when abrupt changes take place in the terrain. This paper reports on the integration of additional information from latest generation full-waveform data into a filtering algorithm in order to achieve improved digital terrain model (DTM) creation. Prior to a filtering procedure, each point was given an attribute based on pulse width information. A novel routine was then used to integrate pulse width information into the progressive densification filter developed by Axelsson. The performance was investigated in two areas that were found to be problematic when applying typical filtering algorithms. The derived DTM was found to be up to 0.7 m more accurate than the conventional filtering approach. Moreover, compared to typical filtering algorithms, dense low vegetation points could be removed more effectively. Overall, it is recommended that integrating waveform information can provide a solution for areas where typical filtering algorithms cannot perform well. Full-waveform systems are relatively cost-effective in terms of providing additional information without the need to fuse data from other sensors
