摘要：Abstract The thermo-mechanical attributes of DMR-249A steel weld joints manufactured by shielded metal arc welding (SMAW) and activated gas tungsten arc welding (A-GTAW) processes were studied using Finite Element Model (FEM) simulation. The thermal gradients and residual stresses were analyzed with {SYSWELD} software using double ellipsoidal heat source distribution model. The numerically estimated temperature distribution was validated with online temperature measurements using thermocouples. The predicted residual stresses profile across the weld joints was compared with the values experimentally measured using non-destructive techniques. The measured and predicted thermal cycles and residual stress profile was observed to be comparable. The residual stress developed in double sided A-GTAW joint were marginally higher in comparison to five pass {SMAW} joint due to phase transformation associated with high heat input per weld pass for A-GTAW process. The present investigations suggest the applicability of numerical modeling as an effective approach for predicting the thermo-mechanical properties influenced by welding techniques for DMR-249A steel weld joints. The tensile, impact and micro-hardness tests were carried to compare the welds. Considering benefits of high productivity and savings of labor and cost associated with A-GTAW compared to {SMAW} process, the minor variation in residual stress build up of A-GTAW joint can be neglected to develop A-GTAW as qualified alternative welding technique for DMR-249A steel.
