期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2016
卷号：5
期号：5
页码：7827
DOI：10.15680/IJIRSET.2016.0505202
出版社：S&S Publications
摘要：Aluminium mainly used in the applications of aerospace and aeronautic industries because of its goodmechanical properties. The main objectives of all composite materials are to reduce the cost. In this paper the wear rateis characterised and studied based on the load and velocity with composite material prepared by using aluminiumreinforced with Red mud and weight fraction (3% 6% 9%). The aim is to reduce the cost of production MMCs. In orderachieve the required aim stir casting method is selected. the obtained results revels that the selected method (stircasting) to develop MMCs is successful and the wear rate is lesser than pure alloy. From results it shows that wear rateof pure alloy is high compared to Al6061-Redmud, the wear rate will be low when Redmud weight percentage at 3%and it is optimum. 9% composition wear rate little lesser than pure alloy, it indicates that in order to have lesser wearrate 3-6% redmud to be used.
