期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2016
卷号：5
期号：6
页码：9574
DOI：10.15680/IJIRSET.2015.0506010
出版社：S&S Publications
摘要：To obtaina weight optimised connecting rod of an industrial compressor which can withstand the loadacting on it due to compressed gases. The initial design of connecting rod is calculated using standard empiricalformulas and designed in Ansys design modular. The connecting rod is used to translate the rotating motion of electricmotor to the oscillatory motion of the piston. The rod is subjected to the high cyclic loads of compression and tension.The optimised connecting rod with reduced weight results in the reduced inertial forces in the system. Once thedesigning of the connecting rod is done FE analysis is done depending on the loading condition of the connecting rod.Loading of connecting rod is calculated based upon the gas pressure and compressor specification. The overall resultsof the analysis are also validated by the analytical method. Thus the process results in the optimised and effectiveconnecting rod.
关键词：Ansys; Connecting rod; Designing; Finite element analysis; Industrial Compressor; Optimization.
