期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2016
卷号：5
期号：7
页码：13542
DOI：10.15680/IJIRSET.2016.0507168
出版社：S&S Publications
摘要：The experiment for optimization of EDM processparameter is performed on EN-31 alloy steel usingcopperelectrode of 4 mm diameter in this paper. The process parametersare decided based on the Taguchi method. Thevarious input factors like Pulse ON time, Discharge current and voltage were considered as the input processingparameters, while the MRR and TWR is considered as the output. Optimization using Taguchi method was performedto predict the best combination of inputs towards maximum output. From this experiments it is found that differentcombination of EDM process parameters are required to achieve higher MRR and lower TWR for EN-31 alloy steel.Mean ratio are used to analyzed the effects of parameters on TWR and MRR and also optimize the optimum inputparameters.
