期刊名称：Majalah Iptek = IPTEK : The Journal for Technology and Science
印刷版ISSN：0853-4098
电子版ISSN：2088-2033
出版年度：2012
卷号：23
期号：2
DOI：10.12962/j20882033.v23i2.8
语种：English
出版社：IPTEK
摘要：The electric vehicle inverter requires an induction motor drive with a high output of voltage and current to reduce the number of batteries used and in turn reduce the vehicle’s weight. In this paper compared two single Phase BuckBoost Inverter (SPBBI), that is between the SPBBI conventional topology with SPBBI new topology uses a buffer inductor. The results of comparison are expected that the new inverter topology can strengthen the voltage greater than the conventional inverter topology. The inverter’s components of capacitor and inductor were reconfigured. The circuit was simulated for various carrier and signal frequencies with various load. The simulation results of the proposed topology compared with the simulation results of conventional topologies commonly used in a variety of frequency and load values. It is shown that the output voltage and current can be strengthened significantly, with a value of more than five times of the output voltage compared to the conventional inverter. The new inverter topology is useful to be implemented for the electric vehicle.
关键词：buck-boost inverter; topology; buffer inductor; carrier frequency
