出版社:The International Institute for Science, Technology and Education (IISTE)
摘要:Limestone is the primary constituent raw material for cement manufacture. While most limestone deposits are suitable for cement making, there are some characteristics of limestone which need to be defined in order to establish a usable raw material supply. These relate to compositional requirements and also the consistency of the deposit in chemical and physical terms. Limestone makes up about 10% of the total volume of all sedimentary rocks. The solubility of limestone in water and weak acid solutions leads to karst landscapes, in which water erodes the limestone over thousands to millions of years. The density and porosity of samples from the various locations vary from 2.61g/cm 3 to 2.72g/cm 3 and 2.70% to 3.80%. The Schmidt hammer rebound number of samples from Ewekoro quarry varies from 32.1 to 33.6. The uniaxial compressive strength of samples from Ewekoro quarry varies from 60.5 MPa to 63.5 MPa thereby classifying the rock as moderate to high strength. The point load strength index is obtained from the LAFARGE laboratory results and varies from 1.239 MPa to 2.185 MPa. The strength classifications fall within the range of moderate to high strength class. Also, the tensile strength, obtained from point load strength ranges from 1.862 MPa to 3.086 MPa. The staining process induces a reaction on the surface of a particular mineral species which results in coloured precipitate characteristic of that mineral. Alizarin red S in NaOH stained the samples purple indicating the presence of magnesium in the carbonate while Alizarin red S in HCL stained the samples red. Physical observation of Ewekoro limestone deposit reveal the rock is highly fossiliferous with the identified fossils indicating deposition in an open shelf environment. Moreover, the limestone deposit was equally observed to be principally mud supported which is indicative of rocks deposited in quiet water and a low energy environment.
关键词:Limestone; Solubility; Ewekoro; Physical and Chemical.