期刊名称：International Journal of Advanced Robotic Systems
印刷版ISSN：1729-8806
电子版ISSN：1729-8814
出版年度：2013
卷号：10
期号：7
页码：303
DOI：10.5772/56752
语种：English
出版社：SAGE Publications
摘要：Beam-type substrate transport robots are widely used to handle substrates, especially in the solar cell manufacturing process. To reduce the takt time and increase productivity, accurate position control becomes increasingly important as the size of the substrate increases. However, the vibration caused by the flexible forks in beam-type robots interferes with accurate positioning, which results in long takt times in the manufacturing process. To minimize the vibration and transport substrates on the fork as fast as possible, the trajectories should be prevented from exciting the flexible modes of the forks. For this purpose, a fifth-order polynomial trajectory generator and input shaping were incorporated into the controller of the beam-type robot in this study. The flexible modes of the forks were identified by measuring the frequency response function (FRF), and the input shaping was designed so as not to excite the flexible modes. The controller was implemented by using MATLAB/xPC Target. In this paper, the design procedure of input shaping and its effectiveness for vibration attenuation in both “no load” and “load” cases is presented.
关键词：Beam-Type Robot; Flexible Mode; Input Shaping; Solar Cell Substrate
Loading...
