期刊名称：TELKOMNIKA (Telecommunication Computing Electronics and Control)
印刷版ISSN：2302-9293
出版年度：2015
卷号：13
期号：1
页码：55-64
DOI：10.12928/telkomnika.v13i1.1299
出版社：Universitas Ahmad Dahlan
摘要：Capacitance measurement accuracy is affected by phase conformity between signal and reference. This work describes phase detection scheme which is necessary for phase synchronization in tomography application. Core processing for calculating phase and amplitude of the detected signal was built on FPGA (Field-Programmable Gate-Array) platform. Phase shift demodulation algorithm employs IP core provided by Xilinx FPGA. Direct digital synthesizer (DDS), multiplier, accumulator, and CORDIC (coordinate rotation digital computer) modules were used as excitation-reference signal generator, signal multiplication, accumulation, and conversion to polar coordinate in order to conduct trigonometric operation respectively. Hardware design was emulated on MATLAB-Xilinx System Generator to observe its performance. Phase detection range 0-114.58 o and mean absolute error 0.58 o have been achieved. Data processing rate solely at digital signal stage was approximately 100data/s suitable for 32-channel electrical capacitance volume tomography (ECVT) system.
其他摘要：Capacitance measurement accuracy is affected by phase conformity between signal and reference. This work describes phase detection scheme which is necessary for phase synchronization in tomography application. Core processing for calculating phase and amplitude of the detected signal was built on FPGA (Field-Programmable Gate-Array) platform. Phase shift demodulation algorithm employs IP core provided by Xilinx FPGA. Direct digital synthesizer (DDS), multiplier, accumulator, and CORDIC (coordinate rotation digital computer) modules were used as excitation-reference signal generator, signal multiplication, accumulation, and conversion to polar coordinate in order to conduct trigonometric operation respectively. Hardware design was emulated on MATLAB-Xilinx System Generator to observe its performance. Phase detection range 0-114.58 o and mean absolute error 0.58 o have been achieved. Data processing rate solely at digital signal stage was approximately 100data/s suitable for 32-channel electrical capacitance volume tomography (ECVT) system.
