期刊名称：Journal of Theoretical and Applied Information Technology
印刷版ISSN：1992-8645
电子版ISSN：1817-3195
出版年度：2013
卷号：47
期号：2
页码：586-589
出版社：Journal of Theoretical and Applied
摘要：To obtain the best injection molding process parameters and mold design for the car B-pillar skid plate， the process parameters of injection molding CAE needs to be optimized. After determining the parts quality standards, we complete the range and analyze the results. But this method can only identify the influence trend of parameters on the test results; it can�t get the best process parameters. This paper uses the modified simplex method as optimization method. We transform the function optimization into the injection molding CAE process optimization. The injection molding process parameters are optimized. We get the best parts injection molding process parameters: the Mold temperature is 33.24, the melt temperature is 213.98℃, injection pressure is 80.12MPa, parts of the program sink mark index is 0.5221%, volume shrinkage is 1.0143% , maximum warping deformation is 1.426mm, the cavity residual stress is 4.8333MPa. Car B-pillar skid plate is injected according to the best process parameters, the obtained parts have met our quality requirements.
关键词：Injection Molding(IM); Process Parameters(PP); Optimization(O)
