摘要：The thesis presents a theoretical analysis of the task, while practical knowledge of selected parts of the dynamics is used to solve individual involved transfers. Further for the two types of programs includes detailed diagrams that is rev/min (rpm) increasing and rev/min reduction. The centre lathe is the object of exploring. Specifically transmission parts such as shafts, gears and pulleys then it is electric drive device, and finally driven parts such as spindle and chuck. Analyze of angular velocities, moments of inertia, kinetic energy, performance and labor of each part of the kit is performed using reduction method, and the system is reduced to a first member, which is an electric motor. We have developed integration of individual gears for the machining modes. Specifically for conventional turning 2800 rpm and for winding springs 14 rpm. In technical practice it is not possible to measure two same results of performance parameters, for reason of passive resistance.
关键词：dynamical equations of the motion; kinetic energy; dynamic analysis of lathe; reduction method
