首页    期刊浏览 2024年12月01日 星期日
登录注册

文章基本信息

  • 标题:Optimasi Proses Hidrolisis Vinasse Sebagai Bahan Baku Resin Polimer yang Ramah Lingkungan
  • 本地全文:下载
  • 作者:Lestari Hetalesi Saputri
  • 期刊名称:CHEMICA: Jurnal Teknik Kimia
  • 印刷版ISSN:2355-8776
  • 出版年度:2016
  • 卷号:3
  • 期号:1
  • 页码:25-30
  • DOI:10.26555/chemica.v3i1.5663
  • 语种:English
  • 出版社:Universitas Ahmad Dahlan
  • 摘要:Vinasse contain s some amine, carboxyl and hydroxyl groups in it’s organic acids. These groups when being combin ed with other materials can be synthesized into a raw material of coating material. This research aim s to break vinasse chain by hydrolysis into amino acids. Hydrolysis is carried out at 110 °C with a residence time of 60-150 minutes (with 30-minute intervals). In addition, the comparison between the volume of vinasse and HCl is 1: 1, 1: 2, 1: 3 and 1: 4. Then the material from the hydrolysis are analyzed their groups. Quantitative analysis is required to determine the composition of vinasse that will be added in the next polimerization processing. The result showed that the optimum conditions of hydrolysis process is at 2 hours and volume HCl with the ratio of 1: 3. FTIR analysis indicated the presence of carboxyl and amines groups on hydrolyzate. The long term goal of this research is the use of vinasse as a coating material derived from biomaterials, as well as renewable materials. It could be expected that hydrolysis under acidic conditions can be an initial step to a coating material with vinasse as a raw material bas e. Keywords: Vinasse, Polimer Resin, Hydrolysis, Coating Material.
  • 其他摘要:Vinasse contain s some amine, carboxyl and hydroxyl groups in it’s organic acids. These groups when being combin ed with other materials can be synthesized into a raw material of coating material. This research aim s to break vinasse chain by hydrolysis into amino acids. Hydrolysis is carried out at 110 °C  with a residence time of 60-150 minutes (with 30-minute intervals). In addition, the comparison between the volume of vinasse and HCl is  1: 1, 1: 2, 1: 3 and 1: 4. Then the material from the hydrolysis are analyzed their groups. Quantitative analysis is required to determine the composition of vinasse that will be added in the next polimerization processing. The result showed that the optimum conditions of hydrolysis process is at 2 hours and volume HCl with the ratio of 1: 3. FTIR analysis indicated the presence of carboxyl and amines groups on hydrolyzate. The long term  goal of this research is the use of vinasse as a coating material derived from biomaterials, as well as renewable materials. It could be expected that hydrolysis under acidic conditions can be an initial step to a coating material with vinasse as a raw material bas e.   Keywords:  Vinasse, Polimer Resin, Hydrolysis, Coating Material.
国家哲学社会科学文献中心版权所有