摘要：Axial-flow pump with a two-way passage has been widely employed in irrigation and drainage projects. Because of the shape of the two-way inlet passage, the impeller easily induces vibration due to unstable turbulent flow. This vibration results in structural cracks and even hinders the safe operation of the pump. Deformation and stress distributions in the impeller were calculated using two-way coupled fluid–structure interaction simulations, and a quantitative analysis of blade deformation and stress is carried out to determine the structure critical region. The results show that the values of deformation and stress significantly decrease with an increasing flow rate and a decreasing head, and the maximum total deformation can be found in the impeller rim, while the maximum equivalent stress can be obtained near the impeller hub. The total deformations in the blade rim decrease from blade leading edge to trailing edge, and the equivalent stress in the blade hub initially increases and then declines, and in the end, it rapidly increases from the blade outlet to inlet. These results reveal the deformation and stress in the impeller to ensure reliability and specific theoretical guidance for the structural optimization design of a pump device.
关键词：Axial-flow pump; fluid–structure interaction; total deformation; equivalent stress; flow-induced vibration
