期刊名称：International Journal of Advanced Computer Science and Applications(IJACSA)
印刷版ISSN：2158-107X
电子版ISSN：2156-5570
出版年度：2017
卷号：8
期号：9
DOI：10.14569/IJACSA.2017.080905
出版社：Science and Information Society (SAI)
摘要：The work on this guideline focus on the development and the design of a circularly polarized metallic EBG antenna fed by two microstrip lines. In order to achieve that purpose, a list of indicative specifications has been established, namely, obtaining an antenna operating from 29.5 to 30 GHz, with a high gain value, an ellipticity rate less than 3 dB and a secondary lobes less than -12 dB which is designed for Radio Frequency Identification (RFID) readers operating in the millimeter band. The size of the patch is 17*17 mm2. Artificial materials, such as artificial magnetic conductor (AMC) and Partially Reflective Surface (PRS) were added as an upper layer to this antenna in order to expand its bandwidth for the RFID reader applications. The new antenna has -35 dB of insertion loss with an impedance bandwidth of 0.6 GHz and a gain of 12.4 dB at 30 GHz. Analysis of the proposed antenna was carried out based on the finite element method using two electromagnetics simulations software: CST-MW Studio® and ANSYS HFSS. The simulation results obtained are presented and discussed.
关键词：Radio Frequency Identification (RFID); Fabry-Perot Cavity Antenna (FPCA); Electromagnetics Band Gap (EBG); circular polarization; high impedance surface (HIS); artificial magnetic conductor (AMC); millimeter wave identification; Partially Reflective Surface (PRS); axial ratio (AR)
