首页    期刊浏览 2024年07月01日 星期一
登录注册

文章基本信息

  • 标题:Flame spread and smoke temperature of full-scale fire test of car fire
  • 本地全文:下载
  • 作者:Dayan Li ; Guoqing Zhu ; Hui Zhu
  • 期刊名称:Case Studies in Thermal Engineering
  • 印刷版ISSN:2214-157X
  • 电子版ISSN:2214-157X
  • 出版年度:2017
  • 卷号:10
  • 页码:315-324
  • DOI:10.1016/j.csite.2017.08.001
  • 出版社:Elsevier B.V.
  • 摘要:

    Full-scale experiments using two 4-door sedan passenger cars, placed side by side in the reverse direction, were carried out to establish the burning behavior and describe the spread of fire to adjacent car. The temperature was measured by thermocouples. Radiant heat flux was measured with heat flux gauge placed at a distance of 5 m, at the right side of the car. Four cameras were placed inside the car and in the fire test room recording burning behavior during the test. Engine compartment was ignited by a sponge dipped with little gasoline. During the experiment, the ignition was initiated in the engine compartment of car I and approximately 20 min were enough time for fire to spread into the second car. Fully-developed burning of two cars occurred at 29 min. It was observed that the flame spread through car roof faster than through the bottom of car compartment. The fire followed a slow rate spread from engine compartment to car cab. The temperature inside the car peaked at the point of 900 °C. The peak smoke temperatures at every location were measured at the range of 89–285 °C. The smoke production at the time of 11 min to 15 min 50 s of fire was 1.76 m3/s, which was obtained through indirect calculation method.

  • 关键词:Car fires ; Fire spread ; Temperature
国家哲学社会科学文献中心版权所有