期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2016
卷号：5
期号：8
页码：15482
DOI：10.15680/IJIRSET.2016.0508194
出版社：S&S Publications
摘要：The axle on which CNC operation was to be conducted was placed on top of lift table of equipment. Forfew operations the axle was supposed to be rotated for 90 degrees for which the entire equipment was supposed to berotated during which there was misalignment of CNC reference and also the aisle width of track was less frequentlyturning the equipment was difficult and in few sub-assemblies the parts were over designed. In order to add value to theproduct and to sort out the issues it had. The concept of turn table with hydraulic actuation is designed. The completedesign study is done on actual design and over material weight is reduced wherever necessary and this material andfabrication cost savings in invested on building the turn table attachment. Here we have conducted the static analysis byusing the HyperMesh as pre-processor software and Optistruct as postprocessor, also we have compared the FEA andtheoretical results.
关键词：Lift Equipment; Top Frame; Scissor arm; Support Frame; Base assembly; Turn table; Static analysis;Optistruct.
