期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2016
卷号：5
期号：9
页码：16188
DOI：10.15680/IJIRSET.2016.0509039
出版社：S&S Publications
摘要：This research work involves the application of electro pneumatics for stamping of products usingpneumatic cylinder. The proposed work involves mainly three operations.1. Clamping2. Stamping3. Ejection of productsA PLC (OMRON with 6 inputs and 4 outputs) is going to be used for controlling sequential operation of threecylinders. A motion diagram is first developed and studied from the required sequences and subsequently translatedinto electrical control circuit. This is again modified to a ladder program which is utilized by the PLC (ProgrammableLogic Controller).The clamping cylinder is used to clamp the work piece, the stamping cylinder is used to stamp on the work piece andejection cylinder is used to eject the work piece. Two direction control valves with single solenoid is used to control themotion of clamping and ejection cylinder, a direction control valve with double solenoid is used to control the motionof the stamping cylinder. Inductive sensor will be used to check the end position of the cylinders.
