期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2017
卷号：6
期号：3
页码：4708
DOI：10.15680/IJIRSET.2017.0603237
出版社：S&S Publications
摘要：Honing is an abrasive machining process that produces a precision surface on a metalworkpiece by scrubbing an abrasive stone against it along a controlled path. Honing is primarily used to improve thegeometric form of a surface, but may also improve the surface texture. Honing is a cutting process where multi-edgetools coated with particles with continuous surface contact between the tool and workpiece are used to optimise thedimension form and surface of pre- machined work pieces. Between tool and workpiece were change in direction oflongitudinal movement takes place. The finished surfaces are characterised by cross hatch pattern on the surface. In ahoning machine, boring tool or honing stick is used to bore an internal bore in the material. It is timed operation andalso rate of production is very less. Timing of honing is defined by quick cutting of the peaks of the pre-machinedbore surface. Due to this operation material wastages are considerable high. So that for reducing processing time andincrease a production. We introducing buffing tool in honing machine. It have multiple point cutting edges and itboring a material in a stock. Here machining time is considerably less when compare with other operation. The cost ofan operation also reduced. Strength of the material may be increased. This rapidly achieves a smoothing of surface inmaterial.
