期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2017
卷号：6
期号：4
页码：5334
DOI：10.15680/IJIRSET.2017.0604032
出版社：S&S Publications
摘要：The cutting fluids are responsible for reducing heat at tool work interface, reducing the cutting force,easy chip removal, high material removal rate (MRR), lubrication improvement between tool and work piece andthereby increasing the surface finish. Good lubricating capacity, less viscosity, better heat removal rate, high heatconductivity and specific heat are the desired flow and heat transfer parameters of cutting fluids. The development oflubricants like cutting fluids traditionally has mineral oil as base fluid. This fact is related to the technical propertiesand the reasonable price of mineral oils. Issues of using fluids in machining related to health, environment, andmanufacturing cost that need to be solved and options to reduce their use has to be developed. Hence there arises theneed for an ecologically benign metal working fluid in machining operations. In this work Soyabean oil based cuttingfluid is developed with different concentration of oil and water. The physical and thermal properties like viscosity,thermal conductivity, relative density and pH of these fluids were measured and the comparative study is conductedwith the respective properties of mineral oil based cutting fluid. A comparative study of Wet machining using puresoyabean oil, soyabean oil based fluids and Mineral oil based fluid were conducted by taking EN-8 steel as workpeicematerial on a CNC Turning Centre. The experimental study was conducted in order to find out the performance ofdeveloped fluid during machining and to compare it with mineral oil based cutting fluid and with dry machining.
