期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2017
卷号：6
期号：10
页码：20793
DOI：10.15680/IJIRSET.2017.0610171
出版社：S&S Publications
摘要：The UTMI has been developed into a Common code (Generalized USB Transceiver) which can be usedfor developing the complete USB device stack. Most of the Low speed and High speed USB devices, which arepresently available like Optical Mouse, Printer, Scanner, Joy Stick, Flash Memory, Video cameras uses this UTMIModule. UTMI (Universal Serial Bus Transceiver Macro Cell Interface ) in general is a two wire, Bi-directional Serialinterface. Based on the Data Transmission Rates USB 2.0 can be implemented into the following Specifications likeLow Speed (1.5 MHz) only (LS), Full Speed (12 MHz) only (FS) and High Speed (480 MHz)/Full speed (12 MHz).UTMI Transmitter sends data to different USB devices through D+ and D- lines where- as the UTMI Receiver getsdata on the Same lines. FPGA implementation of UTMI with HS/FS transmission rate with USB 2.0 specifications arementioned in this Paper. Further UTMI has been designed using VHDL code. It is Simulated, Synthesized andProgrammed to the targeted Spartan 3E FPGA Device using Xilinx ISE tool.
