摘要：We report a radio-over-fiber (ROF) access network with multiple high-repetive frequency mm-wave signals generation utilizing a dual-parallel Mach-Zehnder modulator (DP-MZM) and an semiconductor optical amplifier (SOA) for multiple base stations (BSs). In the scheme, at the central station (CS), signal and pump with frequency interval of 8 are generated by properly adjusting the parameters of the DP-MZM. After FWM in a SOA, new converted optical signals are obtained. Two tones of the optical signals are selected by using tunable optical filter (TOF), which are then sent into a photodiode (PD) to generate multiple mm-wave signals with different frequencies (8, 16, and 24) for different BSs. Based on the proposed scheme, the mm-wave signals with frequencies of 20, 40, and 60 GHz carrying 2.5 Gb/s signal by a 2.5GHz RF signal have been generated by numerical simulation. Simulation results show that the proposed ROF system architecture with multiple-frequency millimeter-wave signals generation serving multiple BSs can work well. This scheme can raise the capacity of ROF system, reduce the requirement of the repetitive frequency of the driven RF signal, and support multiple mm-wave wireless access for BSs.
