期刊名称：International Journal of Electrical and Computer Engineering
电子版ISSN：2088-8708
出版年度：2018
卷号：8
期号：1
页码：280-290
DOI：10.11591/ijece.v8i1.pp280-290
语种：English
出版社：Institute of Advanced Engineering and Science (IAES)
摘要：Recently, there is increasing public awareness of the real time air quality due to air pollution can cause severe effects to human health and environments. The Air Pollutant Index (API) in Malaysia is measured by Department of Environment (DOE) using stationary and expensive monitoring station called Continuous Air Quality Monitoring stations (CAQMs) that are only placed in areas that have high population densities and high industrial activities. Moreover, Malaysia did not include particulate matter with the size of less than 2.5µm (PM 2.5 ) in the API measurement system. In this paper, we present a cost effective and portable air quality measurement system using Arduino Uno microcontroller and four low cost sensors. This device allows people to measure API in any place they want. It is capable to measure the concentration of carbon monoxide (CO), ground level ozone (O 3 ) and particulate matters (PM 10 & PM 2.5 ) in the air and convert the readings to API value. This system has been tested by comparing the API measured from this device to the current API measured by DOE at several locations. Based on the results from the experiment, this air quality measurement system is proved to be reliable and efficient.
其他摘要：Recently, there is increasing public awareness of the real time air quality due to air pollution can cause severe effects to human health and environments. The Air Pollutant Index (API) in Malaysia is measured by Department of Environment (DOE) using stationary and expensive monitoring station called Continuous Air Quality Monitoring stations (CAQMs) that are only placed in areas that have high population densities and high industrial activities. Moreover, Malaysia did not include particulate matter with the size of less than 2.5µm (PM 2.5 ) in the API measurement system. In this paper, we present a cost effective and portable air quality measurement system using Arduino Uno microcontroller and four low cost sensors. This device allows people to measure API in any place they want. It is capable to measure the concentration of carbon monoxide (CO), ground level ozone (O 3 ) and particulate matters (PM 10 & PM 2.5 ) in the air and convert the readings to API value. This system has been tested by comparing the API measured from this device to the current API measured by DOE at several locations. Based on the results from the experiment, this air quality measurement system is proved to be reliable and efficient.
