期刊名称：International Journal of Electrical and Computer Engineering
电子版ISSN：2088-8708
出版年度：2015
卷号：5
期号：5
页码：1083-1091
DOI：10.11591/ijece.v5i5.pp1083-1091
语种：English
出版社：Institute of Advanced Engineering and Science (IAES)
摘要：With the advancement in technology, there was need for efficient and high speed internet through which we could have access to multiple networks as per the user requirement. WLAN met this need to some extent but, due to its low range it was not recommended commercially. With the introduction of WiMAX there was an emerging need to select the best network amongst WiMAX or WLAN depending upon the user location. Pathloss with respect to these particular networks also needs to be compared. In this paper we compare the pathloss modelling for WiMAX and WLAN systems. Different Models have been compared with each other to know which model performs better by keeping same simulation environment. Path Loss models used for WLAN are Okumura, Hata, Cost-231 and Free Space Path Loss whereas models used for WiMAX are Free Space Path Loss, Okumura-Hata, Cost231-Hata and Stanford University Interim. In case of WiMAX three different scenarios Urban, Sub-Urban and Rural is considered where as in case of WLAN only outdoor environment is considered. With the Path Loss comparison, power received for these two technologies; WiMAX, and WLAN is also simulated. MATLAB is the tool used for simulations. Antenna Specifications for WiMAX and WLAN is kept same for all simulation environments.
其他摘要：With the advancement in technology, there was need for efficient and high speed internet through which we could have access to multiple networks as per the user requirement. WLAN met this need to some extent but, due to its low range it was not recommended commercially. With the introduction of WiMAX there was an emerging need to select the best network amongst WiMAX or WLAN depending upon the user location. Pathloss with respect to these particular networks also needs to be compared. In this paper we compare the pathloss modelling for WiMAX and WLAN systems. Different Models have been compared with each other to know which model performs better by keeping same simulation environment. Path Loss models used for WLAN are Okumura, Hata, Cost-231 and Free Space Path Loss whereas models used for WiMAX are Free Space Path Loss, Okumura-Hata, Cost231-Hata and Stanford University Interim. In case of WiMAX three different scenarios Urban, Sub-Urban and Rural is considered where as in case of WLAN only outdoor environment is considered. With the Path Loss comparison, power received for these two technologies; WiMAX, and WLAN is also simulated. MATLAB is the tool used for simulations. Antenna Specifications for WiMAX and WLAN is kept same for all simulation environments.
