期刊名称：International Journal of Electrical and Computer Engineering
电子版ISSN：2088-8708
出版年度：2013
卷号：3
期号：4
页码：467-477
语种：English
出版社：Institute of Advanced Engineering and Science (IAES)
摘要：A solar module can’t transfer maximum power to the load itself due to impedance mismatch. A maximum power point tracking (MPPT) system could be employed to have the maximum power. A new MPPT system has been developed using Buck-Boost type DC-DC converter. The system is highly efficient and robust. PIC16F73 microcontroller has been used to control the DC-DC converter output. PV module output power is measured using microcontroller. The output power is compared with the previous module output power and the duty cycle of the converter is adjusted continuously to track MPP. This process repeats until the output power reaches near to the maximum power point.In this paper, a maximum power point tracking (MPPT) system is developed using two-switch non-inverting buck-boost converter. Perturb and observe (P & O) MPPT algorithm is used to transfer maximum power from the PV panel which is executed using a microcontroller.DOI:http://dx.doi.org/10.11591/ijece.v3i4.2772
其他摘要：A solar module can’t transfer maximum power to the load itself due to impedance mismatch. A maximum power point tracking (MPPT) system could be employed to have the maximum power. A new MPPT system has been developed using Buck-Boost type DC-DC converter. The system is highly efficient and robust. PIC16F73 microcontroller has been used to control the DC-DC converter output. PV module output power is measured using microcontroller. The output power is compared with the previous module output power and the duty cycle of the converter is adjusted continuously to track MPP. This process repeats until the output power reaches near to the maximum power point.In this paper, a maximum power point tracking (MPPT) system is developed using two-switch non-inverting buck-boost converter. Perturb and observe (P & O) MPPT algorithm is used to transfer maximum power from the PV panel which is executed using a microcontroller. DOI: http://dx.doi.org/10.11591/ijece.v3i4.2772
Loading...
