摘要：In this article, three types of high-speed mine submersible pumps were designed and experimented. During the reliability performance test, the axial thrust balancing device of GFQ150-700 was overloaded and damaged due to an unsuitable designed value of axial thrust. The designed hydraulic axial thrust with the actual value is compared in this article, and the reason for axial thrust deviation is discussed. Results show that axial thrust of the theoretical calculation is close to the numerical simulation value at a certain extent. GFQ100-1000 obtains the maximum theoretical axial thrust, while the maximum simulated value is produced in GFQ150-700, and that is corroborated by experiments. The axial blade force is related to the pump stage and area differences between the blade suction and pressure surface. Due to the increasing stage in GFQ100-1000, the axial blade force increases to a remarkable value in an opposite direction with respect to GFQ150-700. The opposite blade force offsetting other hydraulic forces in GFQ100-1000 is responsible for the maximum hydraulic axial thrust emerges in GFQ150-700 instead of GFQ100-1000.
Loading...
