摘要：When designing a randomised controlled trial (RCT), an important consideration is the sample size required. This is calculated from several components; one of which is the target difference. This study aims to review the currently reported methods of elicitation of the target difference as well as to quantify the target differences used in Health Technology Assessment (HTA)-funded trials. Trials were identified from the National Institute of Health Research Health Technology Assessment journal. A total of 177 RCTs published between 2006 and 2016 were assessed for eligibility. Eligibility was established by the design of the trial and the quality of data available. The trial designs were parallel-group, superiority RCTs with a continuous primary endpoint. Data were extracted and the standardised anticipated and observed effect size estimates were calculated. Exclusion criteria was based on trials not providing enough detail in the sample size calculation and results, and trials not being of parallel-group, superiority design. A total of 107 RCTs were included in the study from 102 reports. The most commonly reported method for effect size derivation was a review of evidence and use of previous research (52.3%). This was common across all clinical areas. The median standardised target effect size was 0.30 (interquartile range: 0.20–0.38), with the median standardised observed effect size 0.11 (IQR 0.05–0.29). The maximum anticipated and observed effect sizes were 0.76 and 1.18, respectively. Only two trials had anticipated target values above 0.60. The most commonly reported method of elicitation of the target effect size is previous published research. The average target effect size was 0.3. A clear distinction between the target difference and the minimum clinically important difference is recommended when designing a trial. Transparent explanation of target difference elicitation is advised, with multiple methods including a review of evidence and opinion-seeking advised as the more optimal methods for effect size quantification.
Loading...
