期刊名称：International Journal of Electrical and Computer Engineering
电子版ISSN：2088-8708
出版年度：2019
卷号：9
期号：2
页码：926-933
DOI：10.11591/ijece.v9i2.pp926-933
出版社：Institute of Advanced Engineering and Science (IAES)
摘要：The ISFET sensing membrane is in direct contact with the electrolyte solution, determining the starting sensitivity of these devices. A SiO2 gate dielectric shows a low response sensitivity and poor stability. This paper proposes a comprehensive identification of different high-k materials which can be used for this purpose, rather than SiO2. The Gouy-Chapman and Gouy-Chapman-Stern models were combined with the Site-binding model, based on surface potential sensitivity, to achieve the work objectives. Five materials, namely Al2O3, Ta2O5, Hfo2, Zro2 and SN2O3, which are commonly considered for micro-electronic applications, were compared. This study has identified that Ta2O5 have a high surface potential response at around 59mV/pH, and also exhibits high stability in different electrolyte concentrations. The models used have been validated with real experimental data, which achieved excellent agreement. The insights gained from this study may be of assistance to determine the suitability of different materials before progressing to expensive real ISFET fabrication.
