标题：Use of a three-dimensional printed polylactide-coglycolide/tricalcium phosphate composite scaffold incorporating magnesium powder to enhance bone defect repair in rabbits
摘要：Background The repair of large bone defects remains challenging for orthopaedic surgeons. Bone grafting remains the method of choice; such grafts fill spaces and enhance bone repair. Therapeutic agents also aid bone healing. The objective of this study is to develop a composite bioactive scaffold composed of polylactide-coglycolide (PLGA) and tricalcium phosphate (TCP) (the basic carrier) incorporating osteogenic, bioactive magnesium metal powder (Mg). Method Porous PLGA/TCP scaffolds incorporating Mg were fabricated using a low-temperature rapid-prototyping process. We term the PLGA/TCP/Mg porous scaffold (hereafter, PPS). PLGA/TCP lacking Mg served as the control material when evaluating the efficacy of PPS. A total of 36 New Zealand white rabbits were randomly divided into blank, PLGA/TCP (P/T) and PPS group, with 12 rabbits in each group. We established bone defects 15 mm in length in rabbit radii to evaluate the in vivo osteogenic potential of the bioactive scaffold in terms of the direct controlled release of osteogenic Mg ion during in vivo scaffold degradation. Radiographs of the operated radii were taken immediately after implantation and then at 2, 4, 8 and 12 weeks. Micro-computed tomography of new bone formation and remaining scaffold and histological analysis were performed at 4, 8, 12 weeks after operation. Results X-ray imaging performed at weeks 4, 8 and 12 post-surgery revealed more newly formed bone within defects implanted with PPS and PLGA/TCP scaffolds than blank group ( p < 0.05 ). And micro-computed tomography performed at weeks 4 and 8 after surgery revealed more newly formed bone within defects implanted with PPS scaffolds than PLGA/TCP scaffolds ( p < 0.05). Histologically, the PPS group had more newly mineralized bone than controls ( p < 0.05). The increases in new bone areas (total implant regions) in the PPS and PLGA/TCP groups were 19.42% and 5.67% at week 4 and 48.23% and 28.93% at week 8, respectively. The percentages of remaining scaffold material in total implant regions in the PPS and PLGA/TCP groups were 53.30% and 7.65% at week 8 and 20.52% and 2.70% at week 12, respectively. Conclusion Our new PPS composite scaffold may be an excellent orthopaedic substitute; it exhibits good biocompatibility and may potentially have clinical utility. Translational potential of this article Magnesium and beta-tricalcium phosphate had osteoinduction. It is significant to print a novel bone composite scaffold with osteoinduction to repair segmental bone defects. This study evaluated efficacy of PPS in the rabbit radius segmental bone defect model. The results showed that the novel scaffold with good biocompatibility may be an excellent graft and potentially have clinical utility.
关键词：Additive manufacture ; Bone scaffold ; Magnesium ; Osteogenesis ; Segmental bone defect
