摘要：This research analyzes the time lag, which is a thermal storage performance parameter, when a phase change material is applied to the floor heating system of a mock-up laboratory. The following results are obtained. In terms of the time required for the floor surface temperature to reach 30 °C, the time lag of Room 2 (i.e., the room with the PCM-based floor system) was observed to be 15 min. Additionally, in terms of the time required for the floor surface temperature to decrease to 22 °C, Room 2 exhibited a time lag of 5 h 2 min. Therefore, the study concluded that longer time lags are observed with floor heating systems with PCM.
其他摘要：This research analyzes the time lag, which is a thermal storage performance parameter, when a phase change material is applied to the floor heating system of a mock-up laboratory. The following results are obtained. In terms of the time required for the floor surface temperature to reach 30 °C, the time lag of Room 2 (i.e., the room with the PCM-based floor system) was observed to be 15 min. Additionally, in terms of the time required for the floor surface temperature to decrease to 22 °C, Room 2 exhibited a time lag of 5 h 2 min. Therefore, the study concluded that longer time lags are observed with floor heating systems with PCM.
