摘要：Pumping equipment is one of the main systems of water supply and sewerage, where centrifugal pumps are mostly used due to the simple design and the optimal interval of the parameters of flow and pressure. The paper considers the development of a centrifugal pump from the point of view of system analysis, since this approach considers any technical object as a complex of interacting elements having the properties that are not reduced to the properties of individual elements designed to perform certain useful functions. The aim of the paper is to find patterns of development of the centrifugal pump as a technical system to predict its further evolution. Domestic and foreign patent fund of Class F 04 D in the amount of 724 units was used as the main source. In the paper, the device of the centrifugal pump as a technical system is divided into the following main structural subsystems: impeller blades, impeller disks; housing; pressure pipe and suction pipe. Each of these elements has its main useful function and a number of auxiliaries, which are discussed in detail. It is established that an increase in the degree of control of the centrifugal pump can be achieved by dynamization of transmission, specifically, the regulation of the revolutions transmitted from the engine to the impeller mechanically, with the help of fluid coupling and frequency converters.
其他摘要：Pumping equipment is one of the main systems of water supply and sewerage, where centrifugal pumps are mostly used due to the simple design and the optimal interval of the parameters of flow and pressure. The paper considers the development of a centrifugal pump from the point of view of system analysis, since this approach considers any technical object as a complex of interacting elements having the properties that are not reduced to the properties of individual elements designed to perform certain useful functions. The aim of the paper is to find patterns of development of the centrifugal pump as a technical system to predict its further evolution. Domestic and foreign patent fund of Class F 04 D in the amount of 724 units was used as the main source. In the paper, the device of the centrifugal pump as a technical system is divided into the following main structural subsystems: impeller blades, impeller disks; housing; pressure pipe and suction pipe. Each of these elements has its main useful function and a number of auxiliaries, which are discussed in detail. It is established that an increase in the degree of control of the centrifugal pump can be achieved by dynamization of transmission, specifically, the regulation of the revolutions transmitted from the engine to the impeller mechanically, with the help of fluid coupling and frequency converters.
