摘要：The analysis of various regulatory methods for calculating reinforced concrete slabs for pushing and comparing with experiment results is made. The tested sample, measuring equipment and test bench are described. Sizes and materials for experimental prototype were chosen by existing beamless and capless slabs of monolithic reinforced concrete superstructures with column grid from 8×8 to 9×9 m.
其他摘要：The analysis of various regulatory methods for calculating reinforced concrete slabs for pushing and comparing with experiment results is made. The tested sample, measuring equipment and test bench are described. Sizes and materials for experimental prototype were chosen by existing beamless and capless slabs of monolithic reinforced concrete superstructures with column grid from 8×8 to 9×9 m. Experimental research results of reinforcing concrete plate structure are presented for study purpose of stress-strain state when punching shear collapse occurring. Various aspects and observations obtained during the test are given. The comparison of the tested slab fragment with the complete response of slab structure is performed. Analysis of tested sample stress-strain state and punching bearing capacity calculations results in according to existing regular standards were made. Main criterias of punching shear collapse were determined and new procedure for punching calculation of RC concrete slabs was offered basing on significantly new approach in punching bearing capacity defining.
