摘要：The objective of this paper is to investigate a source of reclaimed asphalt aggregates without binder addition. To this end, a series of triaxial tests was performed. First, monotonic triaxial tests allowed to determine failure resistance of the material at 20°C, 50°C and at 20°C with a prior preheating at 50°C. Then, the resilient and permanent behaviours at 20°C were studied thanks to Repeated Load Triaxial (RLT) tests with different levels of loading. The results show that increasing the temperature test implies a drop of failure resistance but a higher cohesion. RLT tests reveal a stress dependent resilient behaviour. Finally, the experimental results were compared with calibrations of the non-linear elastic Boyce model.
其他摘要：The objective of this paper is to investigate a source of reclaimed asphalt aggregates without binder addition. To this end, a series of triaxial tests was performed. First, monotonic triaxial tests allowed to determine failure resistance of the material at 20°C, 50°C and at 20°C with a prior preheating at 50°C. Then, the resilient and permanent behaviours at 20°C were studied thanks to Repeated Load Triaxial (RLT) tests with different levels of loading. The results show that increasing the temperature test implies a drop of failure resistance but a higher cohesion. RLT tests reveal a stress dependent resilient behaviour. Finally, the experimental results were compared with calibrations of the non-linear elastic Boyce model.
