摘要：The present paper analyses the airflow through the lobed orifices of a transpired solar collector which acts as a solar ventilated facade element through numerical simulation. This study is part of a complex research project which analyses the implementation of phase changing materials within air solar collectors. We decided to study an elementary part of the collectors' absorbent plate with four equivalent orifices in order to obtain the velocity and temperature field at the outlet of the computing domain since the numerical simulation of the entire solar collector (more than 5000 orifices) is not feasible due to the big amount of computational resources and time needed. This paper presents the experimental validation of the numerical model, its final parameters and preliminary results. The numerical simulation was conducted using Ansys Fluent CFD software and the results were processed via Tecplot. The boundary conditions imposed were emphasised and k-ε RNG turbulence model was used according to the literature. After comparing the velocity profiles and temperature fields obtained with both experimental and numerical approaches we concluded that the numerical model reproduces real flow phenomena within acceptable limits. The numerical model thus obtained will be used in further studies in order to optimise the collectors' geometry and characteristics by means of parametrical analyses.
其他摘要：The present paper analyses the airflow through the lobed orifices of a transpired solar collector which acts as a solar ventilated facade element through numerical simulation. This study is part of a complex research project which analyses the implementation of phase changing materials within air solar collectors. We decided to study an elementary part of the collectors' absorbent plate with four equivalent orifices in order to obtain the velocity and temperature field at the outlet of the computing domain since the numerical simulation of the entire solar collector (more than 5000 orifices) is not feasible due to the big amount of computational resources and time needed. This paper presents the experimental validation of the numerical model, its final parameters and preliminary results. The numerical simulation was conducted using Ansys Fluent CFD software and the results were processed via Tecplot. The boundary conditions imposed were emphasised and k-ε RNG turbulence model was used according to the literature. After comparing the velocity profiles and temperature fields obtained with both experimental and numerical approaches we concluded that the numerical model reproduces real flow phenomena within acceptable limits. The numerical model thus obtained will be used in further studies in order to optimise the collectors' geometry and characteristics by means of parametrical analyses.
