期刊名称：IOP Conference Series: Earth and Environmental Science
印刷版ISSN：1755-1307
电子版ISSN：1755-1315
出版年度：2019
卷号：315
期号：6
页码：1-5
DOI：10.1088/1755-1315/315/6/062025
出版社：IOP Publishing
摘要：To restore the shape of curved low-stiff cylindrical parts such as shafts and axles, the process of straightening by transverse bending is considered with subsequent hardening by the method of surface plastic deformation based on the transverse rolling of the cylindrical part with flat plates. The stress states of parts during editing are determined using the Ansys Workbench software package. The results of the distribution of the intensity of operating voltages and residual stresses over the cross section of the cylinder, depending on the absolute compression, are presented. The process in question can be implemented without the use of environmentally hazardous lubricating cooling technological means, which makes it possible to attribute it in the future to one of the types of green mechanical processing technologies.
