摘要：Hot spots appearing in an operating high temperature gas-cooled reactor (HTGR) core have been considered as the most possible reason leading to a severe accident like fission production releasing to the environment, therefore, investigation on their positions and thus seeking ways to reduce the possibility of their appearance have attracted scientists’ attention. In our previous studies, heat transfercharacteristics of a face–centered–cubic (FCC) structured pebble–bed have been discussed,and a correlation on heat transfer coefficient with Reynolds number was presented. In this study, a method, placing a small sphere in thegap area, which is able to enhance the convective heat transfer wasproposed and the effect verifiedas well. The influence of the sphere diameter on heat transfer performances wasinvestigated in details. It is concluded through results analysis that (1) inserted sphere lowered thelocal surface temperature of adjacent pebbles by varying surrounding flow field;(2) maximum velocity of the fluid and average heat transfer coefficientincreased with sphere diameter, particularly, comparing with no small sphere case, 12.95% enhancement was achieved. Such findings may provide dataand information for reactor designers, andhelp to develop a safer HTGR pebble–bedcore.
其他摘要：Hot spots appearing in an operating high temperature gas-cooled reactor (HTGR) core have been considered as the most possible reason leading to a severe accident like fission production releasing to the environment, therefore, investigation on their positions and thus seeking ways to reduce the possibility of their appearance have attracted scientists’ attention. In our previous studies, heat transfercharacteristics of a face–centered–cubic (FCC) structured pebble–bed have been discussed,and a correlation on heat transfer coefficient with Reynolds number was presented. In this study, a method, placing a small sphere in thegap area, which is able to enhance the convective heat transfer wasproposed and the effect verifiedas well. The influence of the sphere diameter on heat transfer performances wasinvestigated in details. It is concluded through results analysis that (1) inserted sphere lowered thelocal surface temperature of adjacent pebbles by varying surrounding flow field;(2) maximum velocity of the fluid and average heat transfer coefficientincreased with sphere diameter, particularly, comparing with no small sphere case, 12.95% enhancement was achieved. Such findings may provide dataand information for reactor designers, andhelp to develop a safer HTGR pebble–bedcore.
