摘要：WEDM is used in machining conductive materials where it is required to obtained complicated and intricate shapes with high accuracy. Various applications are in the field of automobile, medical industries, aerospace etc. WEDM is an economical machining option with short product development cycle. Surface roughness, kerf width, Material removal rate, Recast layer hardness and surface microhardness in WEDM are most important responses. In this paper, effect of varied Wire tension on SR, KW, MRR, RCL hardness and surface microhardness on AISI 304 have been investigated. Pulse on time, pulse off time, current and dielectric fluid are taken as fixed parameter. Results show that Wire tension influences the SR, MRR and Surface microhardness and has no effect on kerf width in case of Stainless steel 304.
