首页    期刊浏览 2024年11月08日 星期五
登录注册

文章基本信息

  • 标题:Effect of Austempering Temperature on Properties, Microstructure and Formation of Ausferrite in CADI (CarbidicAustempered Ductile Iron)
  • 本地全文:下载
  • 作者:Gopal. S. Tiwari ; Sunil. A. Patil
  • 期刊名称:International Journal of Innovative Research in Science, Engineering and Technology
  • 印刷版ISSN:2347-6710
  • 电子版ISSN:2319-8753
  • 出版年度:2018
  • 卷号:7
  • 期号:5
  • 页码:5035-5050
  • DOI:10.15680/IJIRSET.2018.0705045
  • 出版社:S&S Publications
  • 摘要:Austempered Ductile Iron (ADI) results from a special heat treatment of ductile cast iron. Using this process, a phenomenal increase is observed in abrasion resistance and strength as well as toughness of the ductile iron. Proper heat treatment gives desirable mechanical properties if high quality ductile iron is used as raw material of the ADI. Different choice of heat treatment parameters result in different grades of ADI which have different physical properties and behavior. The major responsible factor in the material for its physical strength, toughness and wear resistance and hardness is its carbon content in various forms either free graphitized or combined with some other constituent element like Cu, Ni, Cr, Mg or Si etc. The equivalent carbon percentage decides the nature of the obtained material. This ranges from 4.3% to 4.6% in ADI. Due to combination of carbon with non-Fe constituents, carbidic ADI is formed. The objective of current research is to analyze the effect of austenitizing temperature of 9750C on hardness, micro-hardness, wear resistance and impact toughness properties of a specific combination of carbidicaustempered ductile iron treated at different austempering temperatures and time duration.
  • 关键词:ADI; austenitization; ausferrite; CADI; wear resistance
国家哲学社会科学文献中心版权所有