期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2018
卷号：7
期号：6
页码：6658-6663
DOI：10.15680/IJIRSET.2018.0706040
出版社：S&S Publications
摘要：Fused deposition modelling is one of the additive manufacturing techniques that produce parts from
plastic materials such as Acrylonitrile Butadiene Styrene (ABS), nylon and polycarbonate by depositing semi molten
plastic filament through heated nozzle onto the build platform through as per CAD data. The main objective of the
paper is to study the optimum part building orientation of ABS material processed by FDM technique. In FDM one of
the critical factors is the selection of the build orientation which affects quality of strength of the component, in the
light of the above objective of the present study is to build orientation of mechanical properties of the component. The
test specimens were prepared according to ASTM standard with different built up orientations 00
,450
and 900
. From
FEM analysis it has been observed that in 45˚ build orientation angle as more tensile stress compared to 0˚ & 90˚.
