期刊名称：International Journal of Innovative Research in Science, Engineering and Technology
印刷版ISSN：2347-6710
电子版ISSN：2319-8753
出版年度：2018
卷号：7
期号：6
页码：6986-6993
DOI：10.15680/IJIRSET.2018.0706093
出版社：S&S Publications
摘要：In the modern era, application of composites polymer materials has grown widely in the aeronautical
and aerospace domain. Sheer domination of composite materials can be seen in the industry nowadays. The structural
strength of the composite material depends on the characteristics of the matrix phases and the reinforcements. Further
inclusion of hardening material particles into the structural matrix improves the overall characteristics and properties of
the composite polymer material. In the current research, fabrication of the Aromatic polyamide (Aramid) fiber
reinforced polymer (AFRP) composite material was carried out using epoxy resin hardening material particles in the
matrix form using techniques like Vacuum assisted resin transfer molding (VARTM) and Hand lay-up process. For the
base matrix, epoxy resin was used. For observing the change in the properties, newly formed composite material
specimens were then tested by exposing them to mechanical and structural tests such as compression, tensile and
flexural. Practical evaluation of the improvement in the mechanical properties of the newly formed composite material
was carried out.
关键词：Composite; Hardener; Aramids; Vacuum assisted resin transfer molding; Hand lay;up process;
Compression; Tensile; Flexural;
