期刊名称：International Journal of Innovative Research in Computer and Communication Engineering
印刷版ISSN：2320-9798
电子版ISSN：2320-9801
出版年度：2018
卷号：6
期号：8
页码：7125-7137
DOI：10.15680/IJIRCCE.2018. 0608007
出版社：S&S Publications
摘要：This study was conducted on a Batik Textile Manufacturing Company. It was established in year 1973;
its head office is at Gumpang, kartasura, Sukoharjo, Indonesia. The resulting product is yarn clothes, grey cotton,
cambric (bleaching, mercerized, Sulfurized). To respond with the often discovery of defective fabric products therefore
it is necessary to control the quality of the existing products so that later can reduce defective products. This company
went through several defects identification process including:
Unwoven weft weaving is a type of defect in which there is no pitch thread woven perfectly due to several
reasons.
Double wrap is a type of defect in which yarn that goes double numbering resulting in woven wicker is not
perfect.
Wrap breaking out is a type of defect in which there are broken threads in woven wicker resulting imperfect.
An ugly edge where the defect type on the edge of the fabric is not woven well.
Karat is a type of defect in which there are rust stains on the fabric, this is due to rust obtained from the engine
when the fabric weaving process.
The company also has a quality policy for orientation in its business activities. The seven tools that include: flowchart,
check sheet, histogram, scatter diagram combined with control charts, Pareto diagrams and fishbone diagrams.
关键词：Histogram; Ishikawa; Control Chart; Checklist; Pareto; Run Chart; Scatter Diagram
