期刊名称：Journal of Materials and Environmental Science
印刷版ISSN：2028-2508
出版年度：2017
卷号：8
期号：12
页码：4550-4559
DOI：10.26872/jmes.2017.8.12.480
出版社：University of Mohammed Premier Oujda
摘要：NiCrBSi is a Ni-based alloy universally recognized for its superior mechanical properties, attributed to the presence of hard-dispersed carbides and borides, which is dependent on the deposition technique. Moreover, Metal Matrix Composites (MMC) materials will aim to combine the resilience of metals with high wear resistance specific of ceramics which made them innovative for a large wide of wear resistance applications. In this paper, thick NiCrBSi and NiCrBSi-WC coatings are made ontoS235JR mild steel substrates using an oxyacetylene flame-spraying torch (SuperJetEutalloy, Castolin Eutectic). Two different wear tests: sand/wheel wear test in dry conditions and the pin-on-disc wear test in continuous motion are used to investigate addition effects of WC reinforcing ceramic phase on the microstructure and wear resistance of the coatings layers. The results show that the presence of ceramic phase affects the wear resistance of the coating. For both wear tests, the metallic alloy coating has an improved wear resistance than the reinforced ones. WC reinforcement does not play the protective role of the matrix against wear but improve the hardness. Wear mechanism is mainly controlled by the scratching and by the pull out of WC particles because of their faceted shape.
