摘要：A laboratory device was built to measure the forces that ice exerts on a 0.05 m diameter rigid plastic sphere in two different configurations: in contact with a flat bed or isolated from the bed. Measurements indicated that bed-normal contact forces were 1.8 times larger than drag forces due to creeping flow past a slippery sphere isolated from the bed. Measurements of forces as a function of the bed-normal ice velocity, estimations of the ice viscosity parameter and observations of markers in the ice indicate ice is Newtonian with a viscosity of ~1.3 x 10 11 Pas. Newtonian behavior is expected due to small and transient stresses. A model of regelation indicates that it had a negligible (<5%) influence on forces. Water pressure in the cavity beneath the sphere in contact with the bed had a likewise negligible influence on contact forces. When no cavity is present, drag forces can be correctly estimated using Stokes’s law (Newtonian viscosity) for a slippery sphere. The same law with a bed-enhancement factor of 1.8 is appropriate for estimating bed-normal contact forces. These results reinforce previous laboratory measurements and theories but provide no support for explanations of high debris/bed friction or rates of abrasion that depend on high contact forces.
