首页    期刊浏览 2024年11月07日 星期四
登录注册

文章基本信息

  • 标题:Using Steel-Smelting Slag as a Raw Material Component in the Production of Asphalt Concrete
  • 本地全文:下载
  • 作者:Dmitry Kuznetsov ; Marina Vysotskaya ; Albert Burgonutdinov
  • 期刊名称:E3S Web of Conferences
  • 印刷版ISSN:2267-1242
  • 电子版ISSN:2267-1242
  • 出版年度:2020
  • 卷号:157
  • 页码:1-12
  • DOI:10.1051/e3sconf/202015706010
  • 出版社:EDP Sciences
  • 摘要:The possibility of using polydisperse steel-smelting slag for the production of type B asphalt concrete is investigated, the possibility of its use as a mineral powder, crushing screening and crushed stone is considered. As a result of the study, it was found that a promising area for the use of slag raw materials in the technology for the preparation of asphalt mixes is: as a mineral powder - without additional processing steps; crushing screening - with the development of additional technological operations. The use of raw materials as crushed stone is impractical because of the high average density of the final asphalt mixture. Based on the test results, the characteristics of the fatigue properties of asphalt concrete from fine-grained dense mixtures of type B made on mineral powders from slag and limestone were obtained. It was established that at the initial moment, a large number of cycles to failure are characterized by compositions on slag powder, however, samples from this series tested after 45 days showed a significant rigidity increase and were destroyed earlier than similar samples on limestone. Obviously, this phenomenon is associated with an increase in the brittle properties of the material due to the formation of crystallization-condensation bonds in the structure of asphalt concrete containing slag.
  • 其他摘要:The possibility of using polydisperse steel-smelting slag for the production of type B asphalt concrete is investigated, the possibility of its use as a mineral powder, crushing screening and crushed stone is considered. As a result of the study, it was found that a promising area for the use of slag raw materials in the technology for the preparation of asphalt mixes is: as a mineral powder - without additional processing steps; crushing screening - with the development of additional technological operations. The use of raw materials as crushed stone is impractical because of the high average density of the final asphalt mixture. Based on the test results, the characteristics of the fatigue properties of asphalt concrete from fine-grained dense mixtures of type B made on mineral powders from slag and limestone were obtained. It was established that at the initial moment, a large number of cycles to failure are characterized by compositions on slag powder, however, samples from this series tested after 45 days showed a significant rigidity increase and were destroyed earlier than similar samples on limestone. Obviously, this phenomenon is associated with an increase in the brittle properties of the material due to the formation of crystallization-condensation bonds in the structure of asphalt concrete containing slag.
国家哲学社会科学文献中心版权所有