摘要：In this paper, the fabrication of algal extract‐loaded nanoliposomes was optimized based on the central composite response surface design. Different concentrations of phenolic compounds (500, 1,000, and 1,500 ppm) of algal extract and lecithin (0.5, 1.25, and 2% w/w) were applied for preparation of nanoliposomes at process temperatures of 30, 50, and 70°C. Dependent variables were zeta potential, entrapment efficiency, size, and particle size distribution. The particle size of the loaded nanoliposomes ranged from 86.6 to 118.7 nm and zeta potential from −37.3 to −50.7 mV. The optimal conditions were as follows: 0.5% lecithin, 30°C process temperature, and 1,313 ppm of the phenolic compounds extracted from algae. Under these conditions, the experimental entrapment efficiency of the phenolic compounds was 45.5 ± 1.2%. FTIR analysis has verified the encapsulation of algal extract in nanoliposomes. Algal extract phenolic compounds also increased phase transition temperature ( Tc ) of nanoliposomes (1.6°C to 6.3°C). Moreover, the thermo‐oxidative protection of nanoliposomes for the algal extract has been proved by examining the DSC thermograms. It has been demonstrated that the formulated nanoliposomes have a good stability during storage conditions, and they are able to control the release of phenolic compounds at different pH values. During the encapsulation process, the antioxidant activity of the algal extract has been maintained to an acceptable level. Consequently, algal extract‐loaded nanoliposomes can be used as a natural antioxidant in lipid‐based foods.
