出版社：Visoka poslovna škola strukovnih studija Prof. dr Radomir Bojković, Kruševac
摘要：During the process of operating the stove "Smederevac MBS 9",opening and closing the oven door was perceived as a problem. This paper tackles the distinction concerning the cause of the functioning problem,with the aim of improving the manufacturing process of the specified sub-assembly. It specifies that most of the defects result from the following: bad Kantian sheet and the sheet pressed unskillfully. On the basis of technical resources’ analysis and their deviations’ occurence,the repair procedure of the technical equipment was shown..
其他摘要：Tokom procesa eksploatacije štednjaka „Smederevac MBS 9“ uočen je problem funkcije otvaranja i zatvaranja vrata pećnice. U cilju unapređenja procesa proizvodnje navedenog podsklopa,u radu su posebno izdvojene aktivnosti vezane za utvrđivanje uzroka kvara.
