出版社：University of Rijeka, Faculty of maritime studies
摘要：In this paper, the analysis of the ship piping installation effect on the possibility of mounting and on the operation of pumps was performed. Smaller or greater deviations from the project dimensions which complicate the mounting of the equipment, such as pumps or valves, appear frequently during the piping installation. Additional works on ship piping inevitably mean high additional costs and overrun of time limits scheduled for the piping installation. On the other hand, incorrectly mounted pump will have significantly shorter working life and if pump malfunction happens in an unfavourable moment, the consequences could be serious. Methodology, by which it could be verified if the measured piping deviation is acceptable before the equipment mounting, could yield in significant savings during the piping installation and exploitation. Loads that affect on the pump housing upon incorrect mounting could be calculated precisely by the application of the finite element method. In this paper, the finite element method analysis was performed on the example of a chosen segment of the ship piping where the pump housing loads were calculated as the function of the piping deviation from the project dimensions. On the basis of the obtained results, it is possible to evaluate whether the preexisting condition of piping could be acceptable or not. Directives for the continuation and systematization of this research according to the needs and requirements of a specific technological piping production and installation process are given in the conclusion.
其他摘要：U ovome je radu provedena analiza utjecaja izvedbe brodskih cjevovoda na mogućnost montaže i rada pumpi. Pri ugradnji cjevovoda vrlo se često pojavljuju manja ili veća odstupanja od projektnih dimenzija koja otežavaju montažu opreme poput pumpi, ventila i
关键词：ship piping; pumps; stress analysis; finite element method
其他关键词：brodski cjevovodi; pumpe; analiza čvrstoće; metoda konačnih elemenata
