摘要：This article considers ways of the construction printing of models for agriculture, road, civil and also industrial construction using concrete mixtures. For acquaintance with technology, the architectural element with width of layer of 4 cm and 8 cm all model high has been taken with height of one layer of 2 cm. This model has been prepared with use of two packages of the program complexes having different functionality, namely AutoCAD+SheetCAM+Mach3, the second Sketch-Up+Simplify3D. Each software package was used for design of model in 2D or 3D perspectives, division of model into layers, identical on height, by means of technology of slicer, and also for creation of task of the model printing by concrete for the construction printer of model S 6044. Ready mixes for geopolymer concrete have been taken. By results of the printing, comparison of quality of the models printed on the construction printer and technology of each package of program complexes have been made. The printing of models has shown that quality of the printing is identical. In this case, the second method using a bundle of 2 programs (SketchUp + Simplify3D), which allows printing volumetric models of any shape both in plan and in the future, has an advantage.
