摘要：With the rapid development of the construction industry, the country has a higher demand for scaffolding engineering, so it is very necessary to develop and promote the application of wheel buckle scaffolding. Steel tube scaffold with wheel buckle has the characteristics of clear transmission and good mechanical performance. In order to study the structural performance of steel tubular scaffolding with wheel buckle, the single span three-step element frame was tested. The failure mode and ultimate bearing capacity of the frame are obtained. The finite element software Sap2000 was used to conduct 3d modeling and linear buckling analysis of scaffolds in the test. The results of experiments and finite element analysis show that the failure type of steel tubular scaffolding is the overall torsional instability failure. The connection stiffness at the joint of the diagonal brace fastener has a great influence on the wheel-buckle scaffold. The diagonal brace has obvious influence on the bearing capacity of steel tubular scaffolding body with buckles.
