摘要：Interferograms pertaining to large earthquakes typically reveal the occurrence of elastic deformations caused by the earthquake along with several complex surface displacements.In this study, we identifed displacement lineaments from interferograms; some of which occur on the shallow section of seismogenic faults.However, such displacements are typically located away from the hypocenter, and they are considered as triggered shallow slips.We found that the triggered shallow slips had a varied nature, as follows.(1) No evidence has yet been obtained regarding the generation of large seismic motion via triggered shallow slips; thus, their occurrence is seldom considered a cause of major earthquakes.However, we found that a movement of triggered shallow slip associated with an M 6-class earthquake occurred on an active fault that has previously caused an M 7-class earthquake.(2) At certain locations, several parallel displacement lineaments have been discovered.During the Kumamoto earthquake sequence in 2016, the strain created by the main shock and the motion of triggered shallow slips coincided at a specifc location, resulting in the creation of parallel triggered shallow slips by the main shock.Conversely, at another location, the movements of the main shock and triggered shallow slips did not match, since the main shock was simply a trigger, whereas the latter parallel triggered shallow slips are likely a means for releasing previously accumulated strain.(3) The fault scaling law—which states that the length and displacement of a fault are proportional—does not hold true for triggered shallow slips.However, the parallel triggered shallow slips show a relationship between horizontal spacing and its displacement.This may be attributed to immobility in deep locations.These results lead to the following conclusions. Large earthquakes tend to trigger shallow slips on the pre-existing faults.Subsequently, these triggered shallow slips release accumulated strain by causing fault motions, which in turn result in displacement lineaments.The occurrence of such passive faulting creates weak, mobile fault planes that repeatedly move at the same location.These triggered shallow slips cause the diversity among active faults as a result.
